Consumption values
Programme Duration
(minute)
Energy
(kWh)
Water
(litre)
Rinse hold 12 0.1 3.5
Automatic 80 - 125 0.8 - 1.3 10 - 19
70° Intensive 80 - 90 1.5 - 1.7 18 - 20
Quick 30 0.8 8
50° Economy 160 - 170 0.8 - 0.9 12 - 13
The consumption values are intended
as a guide. They depend on the
pressure and the temperature of the
water, on the variations of the power
supply and on the quantity of dishes.
When the appliance is first
installed
Before using the appliance for the first time:
• Ensure that the electrical and water
connections comply with the installation
instructions
• Remove all packaging from inside the
appliance.
• Check if the factory set of the water
softener complies with the water
hardness in your area. If not, adjust the
level of the water softener.
• Pour 1 litre of water into the salt
container and then fill with dishwasher
salt.
• Fill the rinse aid dispenser.
• Open the water tap.
• Processing residues can remain in the
appliance. To remove these residues,
start a washing programme without
loading the baskets and without using
detergent.
If you want to use combi detergent
tablets (e.g. 3 in 1, 4 in 1, 5 in 1) set
the Multi tab function. Refer to 'Multi
tab function'.
The water softener
The appliance is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water
hardness is measured in equivalent scales,
Clarke degrees, French degrees (°TH) and
10
