Using the SmartClean system
Always make sure to shake excess water off the
shaver before you place it in the SmartClean.
1 Press the top cap to be able to place the
shaver in the holder (‘click’).
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
3 Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the top
cap to connect the shaver (‘click’) (3).
, The battery symbol starts to ash, which
indicates that the shaver is charging.
4 Press the on/off button on the SmartClean
system to start the cleaning program.
, During the rinsing phase, the rinsing symbol
will ash.
Note: The rinsing phase takes approx. 10 minutes.
ENGLISH 27
