Note: Do not clean more than one cutter and
guard at a time, since they are all matching sets.
If you accidentally mix up the cutters and guards,
it may take several weeks before optimal shaving
performance is restored.
5 Remove the cutter from the guard (Fig. 16).
6 Clean the cutter with the short-bristled side
of the brush. Brush carefully in the direction
of the arrows (Fig. 17).
7 Clean the guard with the brush (Fig. 18).
8 Put the shaving heads back into the shaving
unit.
9 Put the retaining frame back into the shaving
unit and turn the orange wheel clockwise.
10 Put the shaving unit back onto the shaver.
Storage
- Put the protection cap on the shaver after use
to prevent damage to the shaving heads (Fig. 8).
Note: Make sure that the lug of the protection cap
covers the release button.
ENGLISH
21
