3.3 LAN
Use this screen to specify a private IP address for your router’s LAN ports (LAN
IP panel), as well as a subnet mask for your LAN segment (DHCP Server panel).
Parameter Default Description
IP Address 192.168.2.1 This is the router’s LAN port IP address (your
LAN clients’ default gateway IP address).
IP Subnet Mask Specify a subnet mask for your LAN segment.
802.1d Spanning Disabled If this function is enabled, this router will use
Tree the spanning tree protocol to prevent network
looping in the LAN ports.
DHCP Server Enabled When enabled, the router will automatically
give your LAN clients an IP address. If the
DHCP is not enabled, you’ll need to manually
set your LAN clients’ IP addresses. Make sure
the LAN client is in the same subnet as this
router if you want the router to be your LAN
clients’ default gateway.
Lease Time When the DHCP is enabled, it temporarily
gives your LAN clients an IP address. From the
drop-down menu, you can specify the time
