Parameter Description

Host Address This is the IP address of the host on the Internet that

will have remote management/configuration access to

the router. This means if you’re at home and your

home IP address has been designated the Remote

Management host IP address for this router (located

in your company office), then you’re able to configure

this router from your home. If the Host Address is left

as 0.0.0.0, this means anyone can access the router’s

Web-based configuration from a remote location,

provided they know the password. Click the “Enabled”

box to enable the Remote Management function.

Note: To access the Web-based management from a

remote site, you must enter the router’s WAN IP

address (e.g., 10.0.0.1) into your Web browser,

followed by port number 8080 (e.g., 10.0.0.1:8080),

as shown below. You’ll also need to know the

password set on the Password Setting screen in order

to access the router’s Web-based management.

Port This is the port number of remote-management Web

interface.

Enabled Select to enable the Remote Management function.

Click “Apply” at the bottom of the screen to save the above configurations. You

can now configure other advanced sections or start using the router (with the

advanced settings in place).