7.
Important: The operator is very careful to
keep the workpiece firmly against the table
and fence during the entire cut.
8.
Workpiece
Inspection
Material Type:
Foreign Objects:
Large/Loose Knots:
Wet or "Green" Stock:
Excessive Warping:
Minor Warping:
NOTICE
If you are using a mobile base with the table
saw, use one of the options below when
moving the saw and the router table attach-
ment:
• Attach an extension to the mobile base
that will provide support for the router
table leg.
• Install a locking caster onto the bottom
of the router table leg.
• Adjust the router table leg foot up,
move the unit, then re-adjust the foot
to provide proper support to the router
table.
