User Manual
MAN10239-01 14
Setting the Interface Parameters
Parallel Interface
The parameters set for the parallel interface mainly match of the most common environments and the printer
can be used immediately after connection to the host.
In case you need to modify the standard parameters see “Printer Setup” later in this section.
Serial Interface
Because of the great variety of the possible connection configurations, when you use the serial interface you
will need to set the parameters accordingly.
To assure a correct functioning of the printer connected through the serial interface, the transmission
parameters set for the printer must match the values set for the host.
In case you need to modify the standard parameters see “Printer Setup” later in this section.
USB Interface
Once the Compuprint SP40Plus driver has been correctly installed, printer can be immediately used with
USB port.
For a complete description of the printer setup procedure see the paragraph “Printer Setup” later in this
manual.
