4 Cisco Product Catalog, April, 2002
1. The VIC-2FXO is approved for off-premise connections in the U.S., Canada, Mexico, Hong Kong, and Malaysia. The VIC-2FXO-EU is approved
for several European countries (refer to Overview for Voice/Fax Network Modules for the Cisco 2600 and 3600 Series routers for specific country
information). The VIC-2FXO-M3 is approved for connections in Australia. Cisco continues to obtain approval in countries throughout the world
for off-premise connectivity.
Table 18-341: Cisco Interface Cards (VICs) Applications
Figure 18-163: One-Slot Voice Network Module - NM-1V
VIC-2E/M
Description Two-port E&M Voice/Fax interface card
Interface Type Used for PBX trunking
Compliance FCC Class B, CE
Safety Conformance UL 1950
Spare VIC-2E/M=
Address Signaling Formats In-band DTMF Out-of-band pulse (10-20 pps)
Signaling Formats Immediate, delay dial, wink-start
Signaling Types Type I,II,III, and V
E-Lead Current Limit 100 mA
M-Lead Sensitivity >3 mA
Pulse Distortion <2 percent
Physical Connector Two wire/Four wire
Number of Connectors/Ports Two
MTBF 1,943,521 hr
VIC Type Applications
VIC-2FXS Used to connect directly to analog phone and fax machines
VIC-2FXO Used to connect to a PBX or key system, and provide off-premise connections
VIC-2E/M Used to connect to a PBX or key system trunk lines
Description Specification
VOICE
2V
V0V1
EN
Enable
LED
H10834
