© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 11 of 15
●
2x3 multiple-input multiple-output (MIMO) with two spatial streams
●
Maximal ratio combining (MRC)
●
Legacy beamforming
●
20- and 40-MHz channels
●
PHY data rates up to 300 Mbps
●
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
●
802.11 dynamic frequency selection (DFS)
●
Cyclic shift diversity (CSD) support
●
Four 10/100 Fast Ethernet ports
●
System OK (green/amber)
●
Activity (green)
●
WWAN (green/amber)
●
SIM status (green/amber)
●
RSSI (green)
●
3G service (green/amber)
●
GPS (green/amber)
●
Speed and link for Gigabit Ethernet WAN port (green)
●
Speed and link for all Fast Ethernet LAN ports (green)
●
Support for both synchronous and asynchronous modes
●
Synchronous maximum speed of up to 8 Mbps
●
Asynchronous maximum speed of up to 115.2 kbps
●
Support for bisync modes
●
Support for network clock synchronization
EIA-232, EIA-449, EIA-530, EIA-530A, V.35, and X.21
Cisco Smart Serial Cabling
Cisco Smart Serial connectors and supported cables:
Product Number
CAB-SS-V35MT
CAB-SS-V35FC
CAB-SS-232MT
CAB-SS-232FC
CAB-SS-449MT
CAB-SS-449FC
CAB-SS-X21MT
CAB-SS-X21FC
CAB-SS-530MT
CAB-SS-530AMT
Cable Type
V.35 DTE
V.35 DCE
EIA/TIA-232 DTE
EIA/TIA-232 DCE
EIA/TIA-449 DTE
EIA/TIA-449 DCE
X.21 DTE
X.21 DCE
EIA/TIA-530 DTE
EIA/TIA-530A DTE
Length
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
10 ft (3m)
Connector Type
Male
Female
Male
Female
Male
Female
Male
Female
Male
Male
Physical dimensions
(H x W x D)
Cisco 819G
1.67 x 7.7 x 7.2 in.
(42 x 196 x 183 mm)
Cisco 819HG and Cisco 819H
1.73 x 7.7 x 8.1 in.
(44 x 196 x 206 mm)
C819HGW and C819 HWD
1.73 x 7.7 x 9.0 in
(44 x 186 x 229 mm)
Mean time between failure
(MTBF – Ground Benign)
C819(H)G-x-K9 where x=S, V, B
C819HGW-S-A-K9 and C819HGW-V-A-K9
C819HGW+7-E-K9, C819HGW+7-N-K9, C819HGW+7-A-A-K9
C819HWD-E-K9, C819HWD-A-K9
Maximum platform power
consumption
Cisco C819H(G)(W)
20 watts
