Drive Motor/Generator Control
Module (DMCM) Coolant Surge Tank
Pressure Cap
See Engine Compartment
Overview on page 5-4
for more information
on location.
The Drive Motor/Generator Control Module (DMCM)
coolant surge tank pressure cap must be fully installed
on the hybrid coolant surge tank.
Notice: If the pressure cap is not tightly installed,
coolant loss and possible damage to the Drive
Motor/Generator Control Module (DMCM) may occur.
Be sure the cap is properly and tightly secured.
Drive Motor/Generator Control
Module (DMCM) Cooling System
In addition to the regular cooling system, the vehicle is
also equipped with a cooling system for the DMCM
system. This system is serviced differently than
the vehicle’s main cooling system. The DMCM cooling
system includes the DMCM coolant surge tank,
DMCM surge tank pressure cap, DMCM cooling pumps,
hybrid cooling radiator and the Drive Motor/Generator
Control Module (DMCM). The DMCM cooling system
uses a 50/50 pre-mixed DEX-COOL™ coolant and
deionized water available at your dealer/retailer.
See “Engine Coolant” and “Cooling System” in the
owner manual for more information.
5-6
