99
FRONT AND REAR SUSPENSION
2235 Cemo Cir., Rancho Cordova, CA 95670
www.jimschevroletparts.com
COIL SPRINGS
To give your ‘Shoebox’ an even lower look, add 1” or 2” Drop Coil Springs.
Combined with our 2" Dropped Spindles, 1” drop coils will put your cruiser
a full 3'” in the weeds safely and easily. For use with either stock arms or
our tubular A-Arms. Stock height also avilable.
C60070............1955 - 1957 Stock Coil Springs, pr (pic)
C60071............1955 - 1957 1” Drop Coil Springs, pr
C60072............1955 - 1957 2” Drop Coil Springs, pr
FRONT SWAY BARS
Stabilizer bars, or sway bars, are used to help control body roll and sway. These
Stabilizer Bars for the ’55-’57 Chevys are made of heat treated steel and are gold
zinc plated. They are available in 1" bar, with urethane bushings.
C60080............1955 - 1957 Front Sway 1” Sway Bar (pic)
C60085............1955 - 1957 Replacement Anti-Sway Bar Link Kit, Rubber
C60086............1955 - 1957 Replacement Anti-Sway Bar Link Kit, Urethane (pic)
FRONT END SUSPENSION
All of our front end suspension parts are USA made by MOOG or TRW.
C60100............1955 - 1957 Upper Ball Joint, ea (pic)
C60101............1955 - 1957 Lower Ball Joint, ea
C60102............1955 - 1957 Upper Control Arm Bumper, ea
C60103............1955 - 1957 Upper Control Arm Bushings, set (rubber)
C60105............1955 - 1957 Lower Control Arm Bumper, ea
C60106............1955 - 1957 Lower Control Arm Bushings, set (rubber)
C60107............1955 - 1957 Upper and Lower Control Arm Bushings, set (Urethane) (pic)
C60120............1955 - 1957 Tie Rod End Boot, ea
C60121............1955 - 1957 Inner Tie Rod End, ea (pic)
C60122............1955 - 1957 Inner Tie Rod End, LH for Factory Pwr Steering, ea
C60123............1955 - 1957 Inner Tie Rod End Sleeve, Factory Pwr Steering, ea
C60125............1955 - 1957 Outer Tie Rod End, ea
C60128............1955 - 1957 Tie Rod Adjusting Sleeves
C60140............1955 - 1957 Idler Arm Bushing (manual) (pic)
C60141............1955-1957 Idler Arm Support Bushing, (manual) (pic)
C60145............1955 - 1957 Idler Arm Bearing Conversion Kit
C60150............1955 - 1957 Drag Link Repair Kit
C60151............1955 - 1957 Drag Link/Pitman Arm Cover Kit
C60160............1955 - 1957 Pitman Shaft Seal, Manual, ea
C60161............1955 - 1957 Upper Sector Shaft Seal, Manual, ea
C60070
C60080
C60086
C60100
C60107
C60111
C60114
C60115
HEIDT’S BALL JOINT CAPS
The finishing touch to your suspension. Cover those upper ball joints with our Ball Joint
Caps. They are polished stainless steel. including polished screws.
C60050............1955 - 1957 Ball Joint Caps (pic)
HEIDT’S UPPER AND LOWER CONTRAL ARM BUSHING CAPS
These Upper & Lower Control Arm Bushing Caps add the final touch to your
suspension. They are fully polished aluminum, in a set of eight, with polished stainless
bolts, and will fit both our Tubular Control Arms or stock control arms. (Set of 8 caps)
C60060............1955 - 1957 Upper & Lower Control Arm Bushings Caps (pic)
C60050
C60060
