2013 Chevrolet MuniCipal vehiCles teChniCal Manual
About This Publication
• Care must be taken during customer installation of equipment and wiring
to ensure that all holes drilled in the body are corrosion protected,
properly sealed and that vehicle wiring harnesses, piping or other
components have not been displaced or damaged. Aftermarket
equipment installers must be mindful of applicable Federal Motor
Vehicle Safety Standards. This information can be obtained directly from
the National Highway Traffic Safety Administration.
• These vehicles are equipped with an air bag system. The air bag system
in your police vehicle includes front seat back, front knee and side
curtain air bags. Customer installed equipment such as security barriers
behind the front seats should not be mounted so that the barrier ends
are within the side air bag deployment zones. The sensors and other
components for the air bag system must not be relocated to
accommodate the installation of customer furnished equipment; please
refer to the service manual for sensor and other component locations.
For information concerning instrument panel top pad mounted
equipment and air bag system deployment zones, see the air bag
information section in this catalog.
• This catalog is not updated during the model year and should not be
used for ordering purposes. It is intended as a source of basic
information. All illustrations and specifications in this literature are
based on the latest product information available at the time of
publication. General Motors reserves the right to make changes at any
time without notice. For further details, consult your local dealer.
• A note about vehicle alterations by independent suppliers: This catalog
shows pictures of vehicles that have been altered or upfitted with
equipment or components supplied to Chevrolet or its dealers by
independent suppliers. Chevrolet is not responsible for the safety or
quality of design features, materials or workmanship of any alterations
by a supplier.
