2011 Chevrolet Municipal Vehicles Technical Manual
About This Publication
• Care must be taken during customer installation of equipment and wiring to
ensure that all holes drilled in the body are corrosion protected, properly sealed
and that vehicle wiring harnesses, piping or other components have not been
displaced or damaged. Aftermarket equipment installers must be mindful of
applicable Federal Motor Vehicle Safety Standards. This information can be
obtained directly from the National Highway Traffic Safety Administration.
• These vehicles are equipped with an air bag system. The air bag system in your
police vehicle includes side curtain air bags. Customer installed equipment
such as security barriers behind the front seats should not be mounted so that
the barrier ends are within the side air bag deployment zones. The sensors and
other components for the air bag system must not be relocated to accommodate
the installation of customer furnished equipment; please refer to the service
manual for sensor and other component locations. For information concerning
instrument panel top pad mounted equipment and air bag system deployment
zones, see the air bag information section in this catalog.
• This catalog is not updated during the model year and should not be used for
ordering purposes. It is intended as a source of basic information. All
illustrations and specifications in this literature are based on the latest product
information available at the time of publication. General Motors reserves the
right to make changes at any time without notice. For further details, consult
your local dealer.
• A note about vehicle alterations by independent suppliers: This catalog shows
pictures of vehicles that have been altered or upfitted with equipment or
components supplied to Chevrolet or its dealers by independent suppliers.
Chevrolet is not responsible for the safety or quality of design features,
materials or workmanship of any alterations by a supplier.
