P/N: 4LGE020-010 v3.1, 2012-03-12
© 2012 Lysholm
All Rights Reserved, Intl. Copr. Secured
29
H. Using the supplied ¼-20x.5 screws with
washers, attach the relocation heat shield to
the coil bracket assembly as shown using the
¼-20 nylock nuts on the bottom side. See fig
3M.
I. Install the relocation bracket assembly to the
driver side valve cover using a supplied
M6x1.0x20mm screw and two (2) factory
screws. See fig 3N, 3O.
Fig 3N
Fig 3O
Fig3M
NOTE: Slight adjustment of the factory A/C line may be
required for adequate clearance around the spark
plug wires.
