P/N: 4LGE020-010 v3.1, 2012-03-12
© 2012 Lysholm
All Rights Reserved, Intl. Copr. Secured
12
W. Throttle body removal
1. Remove the four (4) 10mm headed
screws securing the throttle body to the
manifold. See fig 1AE.
2. Remove the throttle body and green
throttle body seal from intake manifold.
Set aside throttle body, hardware and
seal for future use. See fig 1AF.
X Disconnect both ends of the the breather line
that attaches to the passenger side of the
intake manifold just behind the throttle body.
See fig 1AG.
1. (Manual transmission) Attach to lifter val-
ley cover.
2. (Automatic transmission) Attach to driver-
side valve cover.
Fig 1AE
Fig 1AF
Fig 1AG
