P/N: 4LGE020-010 v3.1, 2012-03-12
© 2012 Lysholm
All Rights Reserved, Intl. Copr. Secured
3
F. Air inlet removal
1. Disconnect the vent line running to the
intake air tube from the front of the pas-
senger side valve cover. See fig 1F.
2. Use an 8mm socket or flat-tip screw-
driver to loosen the hose clamp securing
the intake air tube to the throttle body
and pull the tube away from the throttle
body.
3. Remove the two 10mm nuts securing the
air box as shown in Fig. 1G.
4. Pull the air box straight up to release it
from the retaining grommet on the bot-
tom and remove the entire assembly
from the vehicle.
5. Use a 7mm socket to remove the MAF
sensor element from the air box assem-
bly as shown in Fig. 1H. Set aside for
reinstallation in a later step
Fig 1F
Fig 1H
Fig 1G
10MM NUTS
