4. Slide the inner
clamp (B) into the outer
clamp (A).
5. Turn the latch (C) onto
the outer clamp.
6. Tighten the clamp by turning the latch (C) toward
the side rail.
7. If the truck box has a molded bed rail protector,
insert the latch into the top notch on the inner
clamp.
Adjustment
If there is excessive sideways movement of the
crossrails, move and re-install the clamps on the loose
areas using the inner groove of the clamp.
Cover
Installation
1. Place the cover assembly into the front pivot
mounts to lock the latches into place on both ends
of the front rail.
2. Firmly press down on each side of the cover, until
the latches are secured into the side rails.
2-9
