21
1. Turn the ignition key to the
OFF position.
2. Remove the 12 volt (+)
positive battery cable from
the battery post. Ensure the
terminal cannot contact the
battery post.
-OR -
• If the ignition key is not
accessible, disconnect the
12 volt positive (+) battery
cable (located in the left,
front underhood area).
• Cut all three exposed 12v
positive cables. The cables
are identified by the yellow
First Responder labels.
Note: After disabling 12v power,
wait at least 10 seconds to
allow any un-deployed air
bag reserve energy to
dissipate.
To disable 12v power you must:
Note: The 12 volt
battery cables
have lever type,
quick release
terminals.
