Basic Printing
7
Loading Plain Paper in the Auto Sheet Feeder
For detailed information on the specialty media Canon provides for use
with its various printers, see “Using Specialty Media
Using Specialty MediaUsing Specialty Media
Using Specialty Media” on page 18.
Refer to “Printing Media” in the
User’s Guide
for detailed instructions
on how to load specialty media into the printer.
1 Flatten the four corners of the paper before loading it.
When paper is curled, gently bend it in the opposite direction of the curl
(without curling the reverse side) and then load the paper. How to flatten
paper curl, refer to “Media is curled
Media is curledMedia is curled
Media is curled” on page 38
2 Prepare to load paper.
You can also select the paper source with the printer driver. For details,
refer to the
Printer Driver Guide
.
(1) 1 Open the paper support.
2 Pull out the paper
support extension to
support the paper.
(2) 1 Put your fingers in the notches in
either side of the front cover and
pull down to open it.
2 Pull out the paper output tray
extension completely.
(3) Press the Feed Switch
button so that the auto
sheet feeder lamp lights.
Auto sheet feeder lamp
1
1
2
2
iP6700D_QSG_US.book Page 7 Thursday, April 13, 2006 11:10 AM
