116
Appendices
Although it is the same negative film, the colors of the preview image
change with each scan.
Cause: The exposure function is set to auto color adjustment
Solution: In the exposure adjustment dialog, click the check box to
remove the check mark beside the auto color adjustment
option and drag the slider to the middle. (p. 70)
A scan with the image type set to black and white results in an image
that is whited out or too dark
Cause: Threshold setting is too high or low
Solution: Adjust the threshold setting. (p. 69)
Black border around film included in scanned image
Cause: Scan area not set
Solution: Set the scan area. (p. 41)
Cannot freely specify the scan area in the preview window
Cause: Fixed aspect ratio selected
Solution: Reset aspect ratio to normal setting. (p. 45)
Scanning is taking a long time
Cause: Scan resolution is set too high
Solution: Lower the scan resolution to the minimum setting and
rescan.(p. 32)
Image Quality Problems
Scan quality is poor
Cause: Scan resolution is too low
Solution: Raise the scan resolution and rescan.(p. 32)
Image is blurred
Cause 1: Focus setting was incorrect in manual focus mode
Solution: Refocus in manual focus mode or use the autofocus mode.
(p. 72)
Cause 2: Film was shot out of focus
