240 Troubleshooting
R4CB110
User’s Guide Rev.C
TRBLE.fm A5 size
8/21/03
L
Proof Sign-off:
KOW M. Arai H. Tomizawa
K. Nishi
NOC K. Lee
For example, if you want to set to 10Base and Full Duplex,
pull out the jumper of JP4 and JP6, and put it over the two pins.
The following illustration indicates that JP4 and JP6 are closed
and JP5 and JP7 are opened.
4. After changing the settings, make sure the printer is turned
off, and then insert the print server into the printer’s interface
slot.
5. Turn on your printer.
JP6 (closed)
JP4 (closed)
JP7 (opened)
JP5 (opened)
