Продукция бренда Bosch

Water softening system

Your dishwasher requires soft water to ensure proper washing results and

is equipped with an internal water softening system. However, if you have

a household water softening system, you will not need to use the internal

system provided.

The amount of salt required depends on the degree of hardness of your tap

water (see table at right for more information).

For the water softening system to function properly, it will need to use

dishwasher water softener salt.The amount of salt dispensed can be set from

"H:O0" to "H:07". Salt is not required at H:O0 (this is the default factory

setting - see table at right).

• Open the door (for hidden controls only).

• Turn the unit on using the [ON/OFF] button.

• Hold down the "A" button (see page 4) and press [START] until the

display indicates "H:O0".

• Release both buttons.

• Press the "C" button to select the desired setting.

• Save the selected setting by pressing [START].

• Close the door (for hidden controls only).

tap set value use

water hardness at

ppm CaC03/I dishwasher salt

0 - 110 H:O0 no

120 - 140 H:01 yes

150 - 180 H:02 yes

190 - 210 H:03 yes

220 - 290 H:04 yes

300 - 370 H:05 yes

380 - 540 H:06 yes

550 - 890 H:07 yes

Default setting from factory is H:O0

NOTE: For information on how to use the water hardness test strip, provided in

the detergent sample kit, please see below.

Using a water hardness test strip

_G_n u_ _ch

1 rain

I DDDD

I DDDI

I DDII

I Dmmm

I mmmm

H:O0

H:02

H:04

H:06

yes