bintec RS123
09.12.2014
Subject to technical alterations
Page 5 / 9
bintec elmeg GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
Redundancy / Loadbalancing
BoD Bandwidth on Demand: dynamic bandwidth to suit data traffic load
VPN backup Simple VPN backup via different media. Additional enables the bintec elmeg interface based VPN
concept the application of routing protocols for VPN connections.
Load Balancing Static and dynamic load balancing to several WAN connections on IP layer
BRRP Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with
free selectable priority
Layer 2 Functionality
VLAN Support of up to 256 VLAN (Virtual LAN) for segmentation of the network in independent virtual
segments (workgroups)
Bridging Support of layer 2 bridging with the possibility of separation of network segment via the
configuration of bridge groups
Proxy ARP Enables the router to answer ARP requests for hosts, which are accessible via the router. That
enables the remote clients to use an IP address from the local net.
Interfaces
SFP Slot SFP slot for conventional optical 10/100/1000 Mbps Ethernet SFP module
Ethernet 5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be
switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN
or WAN.
USB 2.0 host USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see
www.bintec-elmeg.com)
USB-Console Service-Interface USB 2.0 plug B (driver: see www.bintec-elmeg.com)
Hardware
Status LEDs Power, Status, 10 * Ethernet, USB, SFP
Realtime clock System time persists even at power failure for some hours.
Wall mounting Integrated in housing
Desktop operation Possible, rubber pad included the package
Environment Temperature range: Operational 0°C to 40°C; storage -25°C to 70°C; Max. rel. humidity 10 - 95%
(non condensing)
Protection Class IP20
Power supply Internal power supply 110-240V 1.5 A, with energy efficient switching controler; complies with EuP
directive 2008/28/EC
Power consumption (idling) Less than 5 Watt
Housing Metal case, opening for Kensington lock, prepared for wall mounting
Dimension Ca. 265 mm x 40 mm x 170 mm (W x H x D)
