QUICK REFERENCE GUIDE
EN
On/off button
You turn your dishwasher on / off with this button. When turning on,
the indicator light for the last used programme will light up.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Program selection buttons
Use the program selection button to select the desired program.
The corresponding program light lights up
Visual Indicator
Improper Loading Of Dishware
17 9094 01 00_AA
Half Load (1/2) button
When there are few dishes, you press this button after pressing
the programme selection button. When turning the dishwasher on,
the indicator light on the button lights up. This function helps you to
save water and energy.
Start/cancel button
You use this button to start the selected programme.
LED progress indicator lights
The program sequence throughout the
washing process can be monitored from the
progress indicator lights on the control panel.
! Warning
Following the washing stage, in order to drain and remove water
from inside the machine completely, the machine will pause for
approximately 35 minutes. Do not worry this is not a fault. Then End
progress indicator light will come on.
! Warning
Do not switch the machine off before End light comes on.
How to cancel the washing program
To cancel a programme while the machine is operating:
Open the door.
! Care must be taken when opening the door, as steam will escape.
Press the Start/Cancel button for 3 seconds. Start/Cancel indicator
light will start flashing. Close the door. The machine will drain
the water inside the machine for 45 seconds. The programme is
cancelled when Start/Cancel indicator light goes off. Then you can
choose and start a new programme.
! Important:
Depending on the stage of the programme you have cancelled,
there may be detergent residue or rinse aid inside the machine and
on the load. Make sure the items in the dishwasher are not used
before washing properly.
! How to change the washing program
To change the program selection while the machine is operating
open the door.
! Care must be taken when opening the door, as steam will escape.
Press Start/Cancel button. The indicator light will go off.
Select the new program. Press Start/Cancel button. The indicator
light will be on and close the door new program will start.
! Important:
The new program will NOT start right from the beginning. It will start
from the stage last carried out by the previous program selection.
! Warning
Depending on the length of the terminated program detergent and
rinse aid may still be in the dispensers.
Wash
Dry
End
1
2
6
4
5
3
Start/Cancel button
LED progress indicator lights
Programme selection button
Programme indicator lights
On/Off button
Rinse aid level indicator light
Half Load (1/2)
7
