Allworx Phone Model 9202E User Guide
Page 4 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Revised: 5/21/14
2. Thread cables through the strain relief guide on the phone base.
3. View the initialization progress on the phone screen. A normal sequence includes:
• Allworx Logo
•
Profile: <profile name> (depe
nding upon the phone configuration)• Configuring Network
• Starting network
• Loading configuration files
• Station Init complete
After successful startup, the phone displays a combination of the date, time, user
presence, user name, and extension or the phone display may suggest assigning the
handset to a user. If this occurs, follow the on screen directions. If the phone does not
follow this sequence or displays an error, contact the Allworx Server Administrator.
2.2 Adjust the Phone Angle
The phone base angle adjusts for easier phone screen reading.
To adjust the phone base angle:
1. Unplug the phone from the PoE or the power supply. Remove the handset from the hook
and lay the phone face down on a soft surface.
2. Hold the base with the fixed tabs facing the bottom of the phone. Select one of the three
available positions to connect the base to the phone. The set of holes at the bottom of
the phone provides the steepest angle.
3. Place the fixed tabs in the preferred holes on the back of the phone. Rotate the phone
base upwards until the flexible tabs click into place.
