Dil ID: 11
Dil Adı: russia
Dil Kodu: ru1tayfun Продукция бренда AEG
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



How to activate Multitab
Press Option until the indicator comes
on.
7.2 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
How to activate TimeSaver
Press Option until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.3 ExtraHygiene
With this option you have better hygiene
results. During the last rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate ExtraHygiene
Press Option until the indicator
comes on.
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
7.4 AutoOpen
This option improves the drying results
with less energy consumption.
While the drying phase operates, a
device opens the appliance door and
keeps it ajar.
At the end of the programme, the
device and the appliance door retract.
The appliance is automatically
deactivated.
CAUTION!
Do not try to close the
appliance door while the
device keeps the door ajar.
This can cause damage to
the appliance.
This option is automatically activated
when you select the programme
.
The indicator comes on.
It is not possible to select this option
with other programmes.
If you want to deactivate the option
AutoOpen, press Option until the
related indicator goes off. In this
condition, the energy consumption of
the programme increases.
8.
BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
ENGLISH 11