Indicator lights
Salt
1)
It comes on when it is necessary to fill the salt container. Refer to 'Use of
dishwasher salt'.
After you fill the container, the salt indicator light can stay on for some
hours. This does not have an unwanted effect on the operation of the appli-
ance.
Rinse aid
1)
It comes on when it is necessary to fill the rinse aid container. Refer to 'Use
of detergent and rinse aid'.
End-of-programme It comes on when the washing programme is completed.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a
washing programme operates.
Display
The display shows:
• The electronic adjustment of the level of the water softener
• Activation/deactivation of the rinse aid dispenser (only with multitab function on)
• The number of the washing programme
• Remaining time to the end of the washing programme
• The end of a washing programme (the display shows a zero)
• Remaining time to the end of the delay start
• Fault codes
• Activation/deactivation of the audible signals.
Delay start button
Use this button to delay the start of the washing programme with an interval between 1
and 24 hours. Refer to 'Select and start a washing programme'.
Programme selection buttons
With these buttons you can select the washing programme (not the Extra Silent washing
programme). Press one of the buttons again and again until the display shows the number
of the necessary programme.
To select the Extra Silent washing programme, press the related button.
Refer to 'Washing programmes' for more data about the washing programmes.
Extra silent programme button
This is a washing programme that operates with a low level of noise.
During the Extra Silent the pump works at a very low speed. This to decrease the level of
noise of 25% compared to the declaration programme. Because of this the programme has
a very long time duration.
Set this washing programme in times when the power rate is more economical.
Multitab button
Press this button to activate or deactivate the multitab function. Refer to 'Multitab func-
tion'.
Control panel
51
