Using the Display and Operating Elements
16
eud-0830/2.1 — I7.7 — 10.2008
Keys
■ Pressing a Key
A key may have various functions depending on the situation and the operating mode. The
function activated depends on the number of times the key is pressed or whether it is pressed
quickly or held down for a moment. Here are some examples:
■ Using the Foxkey
The Foxkey has variable functions. These functions are displayed above the key.
Several contacts are stored under the broad Foxkey, which means you need to press the Foxkey
precisely under the function you want.
■ Using the expansion key module Aastra M535
The configurable keys of the expansion key module Aastra M535 can be operated as the other
configurable keys. In addition, there are the following extensions:
• If you remove an Aastra M535 or if you modify the order of the connected expansion key
modules, the keys configuration does not change.
•The M535 display contrast applies to all connected Aastra M535 expansion key modules.
•The display’s backlight setting of the Aastra M535 is taken from the phone.
• Aastra M535 consists of 3 levels with 15 configurable keys each.
Press the Foxkey.
<long>
Keep the Foxkey held down for a moment (about 2 seconds).
<2x short>
Press the key twice in quick succession.
Press the Foxkey under the position where the display shows the function you
want.
Shift key:
Allows to switch between the 3 levels. Press 1 x each to display the next level.
LED display:
Indicates which level is activated.
➯ If, for example, you are on level 3 of the Aastra M535 expansion key module
and an event occurs on level 1, the event is signalled by the red blinking
LED in position 1.
