OMI
ADAM Matrix Card
This card fits into the standard slots of the RTS ADAM or ADAM-M frames
and provides a gateway to the world of OMNEO IP-compatible networking.
The card consists of the traditional ADAM front and back card components
and enhances ADAM systems with the following features:
• The OMI card is available in configurations up to 64 bidirectional
ports upgradable in increments of 16 ports on a single card.
• In addition to the standard RJ45 Ethernet connection, fiber
connectivity is also supported with the addition of optional single
mode or multimode modules.
• A fully configured single
compact ADAM-M frame
can support up to 256
OMNEO ports, providing a
highly compact single frame
solution for many system
installs.
• The ADAM frame supports
an astounding 512 OMNEO
ports, making it ideal for
larger systems without the
need for frame-to-frame
linking.
OKI
Keypanel Interface Card
This card fits into select RTS user stations and provides
native OMNEO IP connectivity for RJ45 Ethernet
connections into the OMNEO network with optional
single or multimode fiber modules. The card provides
a two-port switch onboard as a pass-thru connection
to allow daisy chaining of keypanels if required. It plugs
into the existing header in the keypanel and comes with
all parts needed to complete the upgrade. The OKI card
is available for the RTS KP-32, RP-1000 or KP 12 CLD
keypanel.
Specification Table
ADAM OMI Card OKI Keypanel Interface Card
Supporting Products ADAM, ADAM-M KP-32, KP 32 CLD, RP-1000, KP 12 CLD
Connections
(2) RJ45 Ethernet Connections
(1) LC Type SFP Fiber Connector
Audio I/O Levels N/A. See note below*
Input/Output (maximum level): +20 dBu
Input/Output (nominal level): +8 dBu
Frequency Response (Input) within ±1 dB from 20 Hz – 20 kHz
THD+N at 1 kHz better than 0.01% @ 8 dB —
Network Delay <20 ms typical
Storage Temperature -40°F to 158°F (-40°C to 70°C)
KP 12 CLD/KP 32 CLD/RP-1000: -40°F to 158°F (-40°C to 70°C)
KP-32: -40°F to 140°F (-40°C to 60°C)
Operating Temperature 32°F to 122°F (0°C to 50°C)
KP 12 CLD/KP 32 CLD/RP-1000: 5°F to 122°F (-15°C to 50°C)
KP-32: 14°F to 105.8°F (-10°C to 41°C)
Power Consumption
14.9 W @ 5 V
(Front and Back combined)
KP 12 CLD/KP 32 CLD/RP-1000 without Fiber: 5 watts
KP 12 CLD/KP 32 CLD/RP-1000 with Fiber: 5.75 watts
KP-32 without Fiber: 5.5 watts
KP-32 with Fiber: 6.25 watts
Weight
Front Card: 0.65 lb (0.29 kg)
Back Card: 0.30 lb (0.14 kg)
4.15 oz (card only)
Card Dimensions
(W x D x H)
Front Card: 0.8” x 12.7” x 6.8”
(21.04 cm x 322.40 cm x 173.11 cm)
Back Card: 0.8” x 6.8” x 6.8”)
(20.0 cm x 172.56 cm x 172.26 cm)
4.5” x 3.0” x 1.1”
(29.03 cm x 19.35 cm x 7.10 cm)
*OMI card is a digital board with build-in audio mixer for 64 inputs. The audio I/O levels are specific to analog sources such as AIO-16 or keypanel.
Digital Matrix |
7
