ZyAIR B-4000
21
4.2 Wall-mount Installation
Follow these steps to attach your ZyAIR to a wall.
1. Locate a high position on the wall that is free of obstructions.
2. Install two screws in the wall 123mm apart. Use screws with 6mm ~ 8mm (0.24" ~ 0.31")
wide heads. Do not screw the screws all the way in to the wall. Leave a small gap between the
head of the screw and the wall. The gap must be big enough for the screw heads to slide into
the screw slots and the connection cables to run down the back of the ZyAIR.
Make sure the screws are securely fixed to the wall and strong enough to
hold the weight of the ZyAIR with the connection cables.
3. Adjust the cables.
a. Run the connection cables down the back of the ZyAIR or
b. Run the connection cables upward and along the edge of the ceiling.
4. Align the holes on the back of the ZyAIR with the screws on the wall. Hang the ZyAIR on the
screws.
Figure 24 Wall-mount Brackets
4.3 Attaching Antennas
Follow the steps below to connect the supplied antennas.
