P-791R v2 Quick Start Guide
3
Look at the LEDs
•The POWER LED blinks green while your P-791R v2 starts up and stays on when it is
ready.
•The DSL LED blinks while the P-791R v2 is trying to establish a connection with the ISP
and stays on when the connection is established.
•The ETHERNET LED stays on if the ETHERNET port is properly connected and blinks
when there is traffic.
V If any of these LEDs are off, check your connections, and inspect your
cables for damage. If the LEDs are still off, contact your local vendor.
2 Status Page
Use the status screen to view basic setup information.
1 Open your Internet browser, and enter
http://192.168.1.1.
V If you cannot access the web configurator, make sure you allow pop-up
windows and JavaScripts and set up Java permissions appropriately. See
the User’s Guide for more information and further troubleshooting tips.
V Make sure your computer’s IP address is in the same subnet as the P-791R
v2’s LAN IP address.
