P-660R-T1/T3 v2 Quick Start Guide
2
After you’ve made the connections, push in the power button
to turn on the P-660R-T1/T3 v2. Look at the LEDs.
•The POWER LED blinks while performing system testing. It
then turns steady on if the testing is successful.
•The DSL LED blinks then turns steady on, and blinks when
there is traffic.
•The ETHERNET LED turns on if the ETHERNET port is
properly connected, and blinks when there is traffic.
V If none of the LEDs are on, unplug the device
and recheck your hardware connections.
2 Set Up Internet Access
You can configure the P-660R-T1/T3 v2 for Internet access in
any one of these ways:
A: Configuration Genie.
B: Zero Configuration.
C: Web Configurator Internet Access Wizard.
