ZyXEL P-330W User’s Guide
43 Chapter 4 System Screens
Figure 16 LAN IP Setup
The following table describes the labels in this screen.
Table 14 LAN IP Setup
LABEL DESCRIPTION
IP Address Type the IP address of your P-330W in dotted decimal notation 192.168.10.1
(factory default).
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your P-
330W will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the P-330W 255.255.255.0.
DHCP DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a
server. Choose Server box selected unless your ISP instructs you to do
otherwise. Choose Disabled the P-330W acting as a DHCP server. When
configured as a server, the P-330W provides TCP/IP configuration for the clients.
If not, DHCP service is disabled and you must have another DHCP server on
your LAN, or else the computers must be manually configured. When set as a
server, fill in the following four fields.
DHCP Client Range This field specifies the contiguous addresses in the IP address pool.
Show DHCP Client Push this button opens a new window which will show you a list of the clients that
have recieved an IP address from the internal DHCP server.
MAC Address Type the MAC address of computer which you want to assign specific IP on you
LAN.
Lease IP Address Type the IP address that you want to assign the computer on your LAN.
Save Click Apply to save your changes back to the P-330W.
Reset Click Reset to begin configuring this screen afresh.
