ZyXELP-330W User’s Guide
Chapter 2 Introducing the Web Configurator 28
The following table describes the sub-menus.
Table 3 Screens Summary
LINK TAB FUNCTION
SETUP WIZARD Use these screens for initial configuration including general
setup, Wireless LAN setup, ISP parameters for Internet Access
and WAN IP/DNS Server/MAC address assignment.
OPERATION
MODE
Use this screen to switch the P-330W between gateway, bridge,
and wireless client mode.
LAN Use this screen to configure you LAN, including default IP
address of the P-330W, LAN DHCP, and viewing current DHCP
clients.
PASSWORD Use this screen to change your password.
STATUS This screen contains administrative and system-related
information.
WIRELESS Basic Settings Use this screen to configure the wireless LAN.
Advanced
Settings
Use this screen to configured advanced wireless system
behavior.
Security Use this screen to configure wireless encryption and
authorization settings.
Trusted Stations Use this screen to set up MAC address filtering for WLAN clients.
ADVANCED Access Control Use this screen to set up packet filtering policies.
Dynamic DNS Use this screen to configure dynamic DNS service settings.
DMZ Use this screen to isolate a specific device from the rest of the
network.
Virtual Servers Use this screen to configure servers behind the P-330W.
Special
Applications
Use this screen to change your P-330W’s trigger port settings.
ALG Use this screen to selection which applications require special
NAT rules.
WAN Port Use this screen to change your P-330W’s WAN ISP settings.
Ping Use this screen to verify network connectivity.
DoS Settings Use this screen to configure Denial of Service settings.
Diagnostics Use this page to look up DNS information.
Administrator Remote
Management
Use this page to allow remote clients to manage the P-330W.
Config File Use this screen to backup and restore the configuration or reset
the factory defaults to your P-330W.
Logs Use this screen to change your P-330W’s log settings and to
view the logs for the categories that you selected.
IP Filtering Use this page to configure a list of IP addresses that the router
will not allow traffic to or from.
MAC Filtering Use the MAC filter screen to configure the P-330W to block
access to devices or block the devices from accessing the P-
330W.
URL Filtering This screen allows you to block sites containing certain web sites
based on their URL.
