D-302754 PowerMaxComplete Installer's Guide 41
A. MCT-234
‘Keyfob’ transmitter. You
can program the AUX
(auxiliary) button to perform
various tasks, in
accordance with the user’s
needs.
Pressing AWAY and
HOME together for 2 sec.
initiates PANIC alarm.
Pressing AWAY for 2 sec.
initiates Latchkey arming.
DISARM
AWAY
AUX
HOME
MCT-234
B. MCT-237
Two-way CodeSecure 6-
button ‘Keyfob’ transmitter.
You can program the AUX
(auxiliary) buttons to
perform various tasks, in
accordance with the user’s
needs.
Pressing AWAY and
HOME together for 2 sec.
initiates PANIC alarm.
Pressing AWAY twice
within 2 sec. initiates
Latchkey arming.
DISPLAY
DISARM
STATUS /
PARTITION
AUX 2
AUX 1
HOME
AWAY
MCT-237
(N.A. in North America)
Single-button pendant units.
The MCT-231 (Code- Secure)
and the MCT-201
(PowerCode) can be enrolled
to perform functions as shown.
Both units look alike.
MCT-231 / 201
C. MCT-134 / 104*
(N.A. in North America)
4-button hand-held units.
MCT-134 (CodeSecure) can
replace the MCT-234 keyfob.
MCT-104 (PowerCode) can
perform emergency and non-
alarm functions. Both units
look alike.
MCT-134 / 104
D. MCT-132 / 102*
(N.A. in North America) 2-
button units. MCT-132
(CodeSecure) can perform
functions as shown.
MCT-102
(PowerCode) can perform
emergency and non-alarm
tasks. Both units look alike.
MCT-132 / 102
E. MCT-131 / 101*
(N.A. in North America)
Single-button units. The
MCT-131 (CodeSecure) and
the MCT-101 (PowerCode)
can be enrolled to perform
functions as shown. Both
units look alike.
MCT-131 / 101
F. MCT-211*
Water-proof,
wrist-worn
Power-Code transmitter.
Can be enrolled to perform
emergency or non-alarm
functions.
MCT-211
I. MKP-150/151
The MKP-150 / MKP-151
operates using two-way
encrypted coded
transmission and provides
aural and visual indications.
For each control panel, a
maximum of two MKP-150 /
MKP-151 keypad devices
may be enrolled.
The device enables the user
to arm/disarm the alarm
system, to initiate
emergency / fire / panic
alarms and to turn lighting
devices on and off.
Note: MKP-150/151 is not
compatible for use when
partition is enabled.
AWAY
MKP-150/151
J. Contact transmitter MCT
J. Contact transmitter MCTJ. Contact transmitter MCT
J. Contact transmitter MCT-
--
-320.
320.320.
320.
MCT-320 is a fully supervised,
PowerCode magnetic contact transmitter,
for use with PowerCode products. The
transmitter includes a built-in reed switch
(that opens upon removal of a magnet
placed near it). The MCT-320 tamper
switch is activated when the cover is
removed or when the detector is removed
from the wall. A periodic supervision
message is transmitted automatically. The
target receiver is thus informed, at regular
intervals, of the unit’s active participation
in the system.
MCT-320
* Not UL listed.
F3 Compatible WL Siren
The MCS-710 / MCS-720 /
MCS-730 (*) wireless siren can
be integrated with the
PowerMaxCompletein areas in
which wiring action is difficult or
impossible. The MCS-710 /
MCS-720 / MCS-730 is a fully
supervised, 2-way
communication device (it
includes a receiver, to receive
activation commands from the
alarm system, and a transmitter
to periodically transmit its status
signal to the alarm system).
When an identifiable activation
command is received from the
PowerMaxComplete, the siren
activates its sounder and the flash
light (strobe light every 1.5
seconds).
* Not UL listed.
MCS-710
MCS-720
MCS-730
