VPCL1 Series Optical Disk Drive
Replacement Instructions
P/N 989200673 Rev. A 2/4
St
ep 3. Locate ODD manual eject hole.
Manually eject the ODD using a paper clip
to eject via eject hole.
Step 4. Identify the (2) screws securing
the ODD to the computer.
Step 5.
Using the included magnetic
screwdriver, loosen the (4) screws
securing the ODD Assembly.
CLOSE ODD BEFORE
COMPETELY REMOVING.
Pull ODD tray all the way out to
expose side brackets. Use these brackets to
help release ODD from connector.
Once ODD is released from
connector continue to slide ODD
assembly out.
Step 8. After the ODD is completely
removed, identify the (5) side screws that
mount the HDD brackets to the HDD.
Step 9. Holding the edge of the HDD,
remove each screw and set the screw
aside. These screws will be used to
mount the HDD brackets onto the
new HDD.
Step 10. All (5) screws and brackets
should now be removed from old HDD.
