CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
Connect a DVD Player or other equipment’s interlaced
Component Video Out to the TV Component Video In
(Y-Pb-Pr) Jacks.
Connect the DVD Player’s Audio Out to the TV AV2
Audio In (L/R) Jacks.
Press POWER to turn on the TV. Turn on external
equipment also.
To access Audio Video inputs, press the INPUT key to
select COMPONENT2.
Notes: DVD Player component output
must
be set to
Interlaced (480i).
Audio Video Input 2 (AV2) and Component inputs
share the same audio (R/L) input jacks.
Connect equipment to the Component2 video
input or the AV2 video input, but not both types at
the same time.
Remote Control
USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS
6
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal
is being detected at the Component jacks. Check
connection, and turn on external equipment.
Press INPUT key after connecting cables to access
the AV inputs.There is NO need to tune to a blank
channel.
