20
Start by attaching your shock mount bands to the microphone body.
The shock mount cradle will then slip easily up under the bands
and support the microphone. Consult Figure 7 to determine which
band to use on the relevant side of the microphone.
There are four bands in total, two of each shape. You will notice the
bands have two ends of different shapes. The larger end is shaped
like an ‘arrow head’ while the smaller end is square. To fit your
band, match the shape of the band to the notches on the VideoMic
Pro’s body.
Figure 6 - There are four bands, two of each shape.
Replacing the shock mount bands
