ControlScape ♦ RadioLinx Dialog Boxes
RadioLinx® ControlScape FH User Manual
ProSoft Technology, Inc. Page 113 of 132
March 16, 2011
8.28 Radio Status Dialog Box - Local Radio
The Radio Status dialog box opens when you select a local radio (a radio
physically connected to the configuration PC) in Diagnostic mode. Use this dialog
box to view the current status of the selected radio.
Radio Name: The name of the radio, configured on the Radio Configuration
dialog box.
Address: This radio's address on the network. The master radio is always 1.
Serial Number: This is the radio’s serial number.
Firmware Version: The radio’s firmware version. All radios on the network
must use the same firmware version.
Hardware: The radio’s hardware version.
FPGA: the version number of the Field Programmable Gate Array logic in the
radio. This logic determines the hardware characteristics of the radio.
Baudrate: The configured baud rate for this radio.
Channel Number: The configured channel number for this radio. All radios
on the network must use the same channel number.
Network Type: This is the network type configured on the Network
Properties dialog box.
OK: Click the OK button to save your selection and close the dialog box.
