Page 4 of 59
TN2009-02A-A4-1.1
Setup RadioLinx OPC Server
Date: Dec-08 February 09
Procedure
Note:
If your PC is not connected to a DHCP server or directly connected via Ethernet to the radio
module, DO NOT FORGET TO ASSIGN A FIXED IP ADDRESS to the PC Ethernet card.
Here are the basic steps needed to establish communications:
A. Setting of the Main Radio
A.1. Install RadioLinx IH browser:
Download RLX-IH Browser from:
http://www.prosoft-technology.com/content/download/12739/165690/file
Then install the Browser on your PC.
A.2. Plug the cables to the RLXIB-IHW:
From left to right: Power connector, serial port and Ethernet port.
Plug the power cable.
For Ethernet connection:
• If you are connecting to the radio through an Ethernet hub or switch, use the
gray (straight-through) cable.
• If you are connecting to the radio directly from your PC without going through
an Ethernet hub or switch, you must use the red (crossover) cable.
