MWN-WAPR150N Wireless Router v11.8
41
(Figure 2.1)
2. Check the status of your Medialink Router.
a. On the front panel of your Medialink Router,
the POWER, SYS, WLAN, and INTERNET
(WAN) LED’s should be lit or blinking. If not,
make sure the cables are connected
correctly.
3. Log In To The Router Settings Page* –
*Important Note: You will not yet have access to
the internet.
a. Launch a web browser such as Internet
Explorer or Firefox and in the address bar
enter the router’s IP Address
“http://192.168.2.1”
*If you did not change the default IP
address of the router in Section 2.2, then
your IP address will be “http://192.168.0.1”
