IOVU-752S Panel PC
Page 28
Step 4: Secure the IOVU-752S to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the IOVU-752S.
Figure 3-18: Arm Mounting Retention Screw Holes
3.4.4 Stand Mounting
The IOVU-752S has Video Electronics Standards Association (VESA) standard mounting
holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA
hole pattern. To mount the IOVU-752S onto a stand, please follow the steps below.
Step 1: Line up the threaded holes on the system rear panel with the screw holes on the
monitor stand mounting plate.
Step 2: Secure the system to the stand with the supplied retention screws (
Figure 3-19).
