Dil ID: 13
Dil Adı: romaina
Dil Kodu: ro8tayfun Produsele mărcii Hitachi
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



50
VIDEO
VIDEO
COMPONENT SET
The COMPONENT SET function is very useful when setting up High Definition, Standard Definition and
NTSC signal while changing the aspect ratio and moving the Horizontal Position.
Press CURSOR to select Color System (HDTV, SDTV/DVD, NTSC).
Press CURSOR to change position.
Press CURSOR or to highlight then CURSOR to select ASPECT RATIO (16 : 9, 4 : 3).
Press CURSOR , to highlight then CURSOR to select H Position.
COLOR SYSTEM
The COLOR SYSTEM function allows you to change tint and color coordinate for DTV Programs.
HDTV - High Definition Television - Use for High Vision Signal Y-P
B
P
R
from HDTV Set-Top Box.
SDTV/DVD - Standard Definition Television or Digital Video Disc Y-C
B
C
R
such as DVD (Digital Video Disc Player).
NTSC - Basic U.S. Standard Normal Signal Standardized by the National Television Standard Committee.
ASPECT RATIO
16 : 9 - Screen changes to 16 : 9 aspect ratio.
HDTV signal is normally 16 : 9 aspect ratio.
4 : 3 - Screen changes to 4 : 3 aspect ratio.
SDTV and NTSC signals are normally 4 : 3 aspect ratio.
H POSITION
This function allows you to adjust the Horizontal Position on DTV mode. This is convenient when using SET TOP BOX.
ADVANCED
SETTINGS
Set Up
Custom
Video
Audio
Theater
Info
Set UpSet Up
I
Set UpSet UpSet Up
Set Up
Video
Audio
Theater
Info
I
MENU TO MENU BAR TO QUIT EXIT
CURSOR
CURSOR
Set Up
Custom
Video
Audio
Theater
Info
Set UpSet Up
I
Set UpSet UpSet Up
Set Up
Video
Audio
Theater
Info
I
MENU TO MENU BAR TO QUIT EXIT
Set Up
Custom
Video
Audio
Theater
Info
Set UpSet Up
I
Set UpSet UpSet Up
Set Up
Video
Audio
Theater
Info
I
MENU TO MENU BAR TO QUIT EXIT
100%
50%
50%
50%
CURSOR
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
RESET
ADVANCED
SETTINGS
COMPONENT SET
COLOR SYSTEM
HDTV SDTV/DVD NTSC
ASPECT RATION
16 : 9 4 : 3
H POSITION
32
ADVANCED SETTINGS
3 DYC
3D VIDEO DISC
AUTO COLOR
COLOR TEMPERATURE
COOL WARM
COMPONENT SET
FAV
CH
FAV
CH
NOTE: Set up a Component Signal and switch to Video 2 by pressing the Input Button on the Remote Control when planning to
use the component set function.
NOTE: Refer to page 78 for Feature Information.