113
Client PC IP Please input the starting IP address in the left
address (2): field, and input the end IP address in the right field to define a
range of IP addresses, or just input the IP address in the left
field to define a single IP address.
Client PC Please check all services you want to allow or
Service (3): deny this IP address to use, you can check multiple services.
Protocol (4): If the service you need is not listed above, you can create a new
service on your own. Please select TCP or UDP, if you’re not
sure, please select “Both”.
Port Range (5): Please input the port range of new service here. If you want to
specify port 80 to 90, please input “80-90”; if you want to apply
this rule on a single port, just input the port number, like “80”.
Add (6): When you finish with all settings, please click “Add” to save
settings, you’ll be brought back to previous menu, and the rule
you just set will appear in current IP filtering table.
If you want to remove all settings on this page, click the “Reset” button.
