The default settings for all the configuration commands Default Settings
Intelligent Blade Panel Module
283
Ip ip javamode
ip dhcp client-identifier text Default
(system clear config : ip dhcp client-identifier hex <MAC
address>)
no ip http secure-server
ip http secure-protocol TLS1 SSL3
ip http secure-port 443
ip http server
no ip ssh
ip ssh maxsessions 5
ip ssh timeout 5
username username defaultlogin defaultList
dot1x no dot1x system-auth-control
dot1x default-login defaultList
Radius no radius accounting mode
radius-server retransmit 4
radius-server timeout 5
telnet telnet sessions
telnet exec-timeout 5
telnet maxsessions 5
snmp-server snmp-server host 0.0.0.0 public
snmp-server community ipmask 0.0.0.0 public
snmp-server community ro public
snmp-server host 0.0.0.0 private
snmp-server community ipmask 0.0.0.0 private
snmp-server community rw private
snmp-server enable traps authentication
snmp-server enable traps linkmode
snmp-server enable traps multiusers
snmp-server enable traps stpmode
no snmp-server enable trap ospf
no snmp-server enable trap dvmrp
no snmp-server enable trap pim
mac-address-table mac-address-table aging-time 300
