ELN/
[email protected] and your password, where username is your own username (some Earthlink users may not need the ELN/ in front of username).
For most other ISPs, enter username.
Step 7 Idle Time Out should be set to zero. Set MTU to 1492, unless specified by your ISP.
Note: If you experience problems accessing certain websites and/or email issues, please set the MTU to a lower
number such as 1472, 1452, etc. Contact your ISP for more information and the proper MTU setting for your
connection.
Step 8 Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the
router.
Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to
your ISP, plug the power back into the router. Wait about 30 seconds and log back into the router.
Step 10 Click on the Status tab in the web configuration where you can view the device info. Under WAN,
click DHCP Release, then click Back, then click DHCP Renew, and then click Back. You should now see that
the device info will show an IP address, verifying that the device has connected to a server and has been
assigned an IP address.
- 56 -
