Programming
Chapter 3
326
Figure 3.22
General
AF1 A
verage Function W
ord and Digit Format
171615141312111076543210
S
Digit 1
(MSD)
Digit 2
Digit 3
Bit No.
Data Address
Digit 2
Digit 3
(LSD)
Input 1
S
Digit 2 Digit 3
Digit 2 Digit 3Digit 1
S
Digit 1
(MSD)
Digit 2 Digit 3
Result Address
Digit 5Digit 4
Result
DE
E = Enable Bit (1 = Function in Progress)
S = Sign Bit (1= Negative)
D = Done Bit (1 = Function Complete)
MSD = Most Significant Digit
LSD = Least Significant Digit
11585
Digit 6
ER
ER = Error Bit (Set if number of readings = 0)
S
Digit 2
Digit 3
(LSD)
S
(LSD)
Digit 1
(MSD)
Digit 1
Digit 1
(MSD)
(LSD)
Input 2
Input 3
Input N
m
m + 1
m + 2
m + 3
m + N
n
n + 1
N = Number of Readings Being Averaged
Number of Inputs
3. Enter a data address and store in that address the number of values to
average. Then enter an address for the result.
Let’s choose a data address of 200 and the number of values to average of 003.
Also, let’s choose 305 as the address for the result. Entering these values results
in the data table format shown in Figure 3.23. Once you enter the data address,
the addresses of the remaining input words are selected automatically by the
AF1.
