PROGRAM TRUNK NAMES
This program is used to assign a character name or identification for each C.O.
line. To verify the system software version, press TRSF 727. If the version is
V1.x, you may assign a name ten characters long. If the version is V2.x or later,
you may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 404 [701] TRUNK NAME
Display shows
2. Dial trunk (e.g., 704) OR press UP or [704] TRUNK NAME
DOWN to select trunk and press the right
soft key to move the cursor
3. Enter the trunk name using the procedure [704] TRUNK NAME
in
Program Station Names
and press the SAMSUNG
right soft key to return to step 2
4. Press TRSF to store and exit programming
OR press SPK to store and advance to
the next program
14 15
PROGRAM STATION GROUP NAMES
This program is used to assign a character name or identification for each sta-
tion group (501–529). To verify the system software version, press TRSF 727. If
the version is V1.x, you may assign a name ten characters long. If the version
is V2.x or later, you may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below.
ACTION DISPLAY
1. Press TRSF and then dial 602 [501] SGR NAME
Display shows the first group
2. Dial the group number (e.g., 505) OR [505] SGR NAME
press the UP or DOWN key to make a
selection and press the left or right
soft key to move the cursor
3. Enter the name using the method [505] SGR NAME
in
Program Station Names
SAMSUNG
4. Press the left or right soft key to return to
step 2 OR press TRSF to store and exit
programming OR press SPK to store and
advance to the next program
