CWA-854HT User’s Guide
Table 2-3 Setup Wizard: Wireless Basic Settings
LABEL DESCRIPTION
access point at the same time.
Network
Type
This field is applicable when you select Client
Select Infrastructure
Select Ad-hoc
in the Mode field.
to allow a computer to connect to a wireless network via an access point.
to allow a compute to connect to another wireless-enable computer.
SSID An SSID uniquely identifies a wireless network.
same SSID to communicate with each other.
Enter the name of a wireless network to which the computer connect
All devices in a wireless network must use the
s.
Channel
Number
A channel is the operating frequency in which a wi
channels you can select varies depending on
Select a channel number the CWA-854HT
To reduce interference, select a channel number
wireless device/network uses. For example, if
channel 6, set the CWA-854HT to use channel 1
reless device transmits data. The number of
your country’s regulation.
is to use for wireless communication.
that is further away from what the nearest
the nearest wireless device/network is using
1.
Enable MAC
Cloning
(Single
Ethernet
Client)
You can set the CWA-854HT
WLAN interface. Thus the wireless network appear
network. This increases the security level.
Enter a computer’s MAC address in six pair
00a0f45a0010.
to use the same MAC address on all outgoing packets through the
s as a single Ethernet device to the external
s of hexadecimal notation. For example,
Enable
Universal
distance to connect another
Repeater
When you enable this universal repeater function, the CWA-854HT will extend the wireless
wireless router or AP.
Mode
SSID of
Extended
Interface
Input the Parent SSID, when you select the Universal Repeater Mode.
Cancel ncel to start configuring the Setup Wizard again. Click Ca
<<Back Click <<Back to discard the changes and go back to the previous screen.
Finished Click Finished to save the settings. The CWA-854HT will reboot to make the changes take
effect.
14
