Toll free: 1-877-536-3976
Local: 1-408-962-0515
atlona.com
9
b. Both ends of the link are connected to the corresponding equipment and to the same correspond-
ing channel port.
c. Cable connections at both the video/audio channels are securely fastened to each connector.
Turn the power off, then back on to reset the link.
TERMINAL BLOCK PIN-OUT
AUDIO
one stereo channel is transmitted in each direction.
To send audio signals, label and connect two cables to the “AUDIO OUTPUT” connectors of the line
level audio source. Connect the other end of the cables to the front panel terminal block connectors
labeled “AUDIO IN”. For stereo channels, be sure to match the cables at both ends (L to L, R to R).
To receive audio signals, at the far-end location, label and connect two twisted shielded pair cables to
the “AUDIO INPUT” connectors of the line level audio receiver. Connect the other end of the cables to
the front panel terminal block connectors labeled “AUDIO OUT”. If using stereo channels, be sure to
match the cables at both ends. (L to L, R to R).
